Materials Handling Energy UNIT 2
This electrical power unit functions electrical power up gravity down circuit. Activate the begin solenoid to start the motor to lift the machine. The lowing movement is activated by the solenoid valve with all the lowering pace managed from the strain compensated flow manage valve. Items of this series could be broadly used in the industry of logistic units for example fork lift, mini lift table, etc.
one. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean all of the hydraulic parts concerned before mounting the power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst,which ought to also be clean and cost-free of impurities, N46 hydraulic oil is recommended .
4. Oil altering is required following the initial one hundred operation hours,afterwards after every single 3000 hours.
5. The energy unit ought to be mounted horizontally.
Material Dealing with Energy UNIT 1
This power unit is designed to the fork lift marketplace, consisting of really effective gear pump, DC motor, guide raise and decrease valve, tank, ect. The up and down movement are managed by the lever from the manual release valve, which can be equipped with an electrical switch to activate the motor. The lowing pace is managed through the strain compensated flow manage valve.
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean all the hydraulic elements concerned in advance of set up of the electrical power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which should also be clean and cost-free of impurities, N46 hydraulic oil is advisable .
four. Oil modifying is needed following the initial 100 operation hrs, afterwards when every 3000 hours.
five. The energy unit shown is built to be mounted horizontally.