News Center
Product center
When designing gear meshing, pay attention to the width of the small gear 5-10 mm wider than the large gear.Such advantages: 1. If the width of the two gears is the same, the installation error will cause the two gears...
The gearbox reduction motor drives the hard-tooth surface reducer, which saves space, is reliable and durable, and has high overload carrying capacity. The high power can reach 132KW, and the low power can reach 0.5w; low energy consumption...
The rack and pinion transmission is a widely used transmission mechanism. It can not only convert rotary motion into linear motion, but also convert linear motion into rotary motion, and can be transmitted with other...
The model and specification of the filter element of the wind power gearbox must correspond to the original model and specification, otherwise the oil collecting ring in the filter cartridge cannot be centered and cannot be covered.The precautions for the electric transmission filter element should be considered...
Generally speaking, when many manufacturers produce transmission gearboxes, the transmission gearboxes are sound, but as long as the transmission gearboxes can be used without exceeding a certain index, then...
The modulus is the factor that determines the size of the gear.Gear modulus is defined as a basic parameter of modular gear teeth, which is artificially abstracted to measure the scale of gears.The purpose is to standardize the gear...