The torque that the pulley can drive is less thanMachining gearboxThe torque.Even the timing belt is the same.If the torque is too large, the teeth will jump.Machining gearbox, Unless it is broken by the tooth, it will be destroyed.Machining gearThe box is generally used at high torque and low speed, and the pulley is used at high speed and low torque.
Machining gearboxes are widely used in wind turbines. They are commonly used components in wind turbines and are also important mechanical components.The main function of the gearbox is to transfer the power generated by the wind wheel under the action of the wind to the generator, so that it can obtain the corresponding speed.Usually the speed of the wind wheel is very low, far from reaching the speed required by the generator.It must be achieved through the speed-increasing action of the gear pair of the gearbox, so the gearbox is also called a speed-increasing box.
Home
Page location:
contact address:Jianyang Industrial Concentration Zone, Jianhu County
