? Processing Agricultural Gear Box - Yancheng XINLAN Jinggong Machinery Co., Ltd.

Yancheng XINLAN Precision Machinery Co., Ltd.

Gear box processing, gear box processing, precision gear processing, gear processing, gear box customization

Page positionPage location:Home > Machining gearbox > Processing agricultural gearboxes

Processing agricultural gearboxes

Source: http://www.agricultural-gearbox.top/product682354.html时间:2021-01-27 18:57:17

Agricultural gearboxes are widely used, for example in wind turbines.Gearboxes are important mechanical components widely used in wind turbines.Its main function is to transfer the power generated by the wind wheel under the action of the wind to the generator, so that it can obtain the corresponding speed.

The storage of agricultural gearboxes is generally in a dry and ventilated environment, the ground should be flat, the gearbox should be placed stably, and the gearbox should be kept stationary.In addition, anti-rust treatment is required, and it cannot be stored in the open air.Due to poor storage conditions, some wind farms often place gearboxes in the open.This can easily cause problems.And the weather.According to weather conditions, we must apply rust inhibitor every 6-12 months.Environmental conditions should keep the air humidity below 70%, and the temperature is generally between 18-45 degrees.During storage, the holes of the gearbox need to be greased.Note: The gearbox is strictly prohibited to be stored outdoors, and the anti-corrosion period is 6 months from the date of shipment. (If there are other anti-corrosion provisions in the contract, the contract shall prevail).When the storage period exceeds the allowable anti-corrosion period, the anti-corrosion treatment should be carried out again.Please consult our factory for specific methods.For example, when repainting the outer surface of the transmission, the skeleton oil seal at the input shaft should be protected.Solvents in paint and rubber can cause rubber aging and oil leakage.