Gearboxes are widely used in motors, and motors are commonly used parts in wind turbines. It is an important mechanical part. DC gearboxes
The main function of the gearbox is to transmit the power generated by the wind wheel under the action of the wind to the generator, so that it can obtain the corresponding speed.Usually the speed of the wind wheel is very low, far from reaching the speed required by the generator.It must be achieved through the speed-increasing action of the gear pair of the gearbox, so the gearbox is also called the speed-increasing box.
The role of the gearbox:
1. Acceleration and deceleration are usually called variable speed gearboxes.
2. Change the transmission direction.For example, we can use two sector gears to transmit the force vertically to another rotating shaft.
3. Change the turning point.Under the same power condition, the faster the gear speed, the smaller the torque on the shaft, and vice versa.
4. Clutch function: We can separate the engine and the load by separating the two gears initially engaged.Such as brake clutch.
5. Allocate power.For example, we can use one engine to drive multiple driven shafts through the main shaft of the gearbox, so that one engine can drive multiple loads.
Home
Page location:
contact address:Jianyang Industrial Concentration Zone, Jianhu County
